Autocad Civil 3D 2014- command "Layiso"

Autocad Civil 3D 2014- command "Layiso"

1. Provide objects with different layer

2. Command "layiso" 

3. Choose object need to isolated

4. Copy all object

5. paste -- Object with isolated will copy / move only

Issue:

When isolating layers using the Layer Isolate (LAYISO) command, there is different display behavior in AutoCAD and AutoCAD based products. The layers are still visible and appear semi-transparent rather than hidden

Causes:

The change in display behavior is caused by different standard setting for the LAYISO command. There are two possibilites for the behavior of unselected elements:

Lock and shade the unselect elements

Turn the unselect elements off

By default the Lock and shade will be used

All layers except the layers of the selected objects are either turned off, frozen in the current layout viewport, or locked, depending on the current setting. The layers that remain visible and unlocked are called isolated.

The following prompts are displayed.

Select Objects on the Layer(s) to be Isolated

After selecting one or more objects, all layers except the layers of the selected objects are either turned off, frozen in the current layout viewport, or locked, depending on the current setting. The layers that remain visible and unlocked are termed isolated.

Note: Locked layers are faded by default. You can specify the percent of the fading from the Lock option in this command. You can later change the value with the LAYLOCKFADECTL system variable.

If you make changes to layers within a session and you want to restore the layers to the state they were in immediately before you entered the LAYISO command, use the LAYUNISO command.

Settings

Controls whether layers are turned off, frozen in the current layout viewports, or locked.

Off

Turns off or freezes all layers except the layers of the selected objects.

Vpfreeze

In a layout, freezes all but the selected layers in the current layout viewport only. Other layout viewports in the drawing are unchanged.

If not in a layout, all other layers are turned off instead.

Off

Turns off all but the selected layers in all viewports.

Lock and Fade

Locks all layers except the layers of the selected objects, and sets the fading for locked layers